Skip to main content
Wikispaces Classroom is now free, social, and easier than ever.
Try it today.
Pages and Files
Path of Invention
Making a Nugget
putting it together
..... Make GyroMouse from Scratch
..... Make PCB for MCU and TrackPoint ADCs
Old / Obsolete Stuff
Run Down of whole Proj
A TrackPoint connect as a PS2 mouse. you just have to wire it up correctly. (*)
(*) the above picture is missing the reset pin... the edgemost pin should be held high for a few moments upon power up.
I got my TrackPoints from old laptop keyboards. on one particular brand it is possible to separate the strain gauge from the circuitry:
the IBM part number is 08K4959, the Fru number is 08K4988.
separating, trimming the circuit board and glueing a rumble unit to the base gives:
and the circuitry can be tidied thus:
the problem is that most new computers do not have a PS2 port, and even if they do, that's not much good because I want to use several.
so i had to use a
in case you're wondering "why doesn't he just run each one through a PS2 -> USB converter, and separate the mouse signals with a bit of nifty windows programming?" the answer is that these converters report as a generic USB mouse. I need to send a custom commands to these TrackPoints, because I'm interested in the raw-pressure values - especially the vertical pressure. it is impossible to send these commands through converters; these commands are not part of the PS 2 protocol - they are particular to the TrackPoint. but kudos if you thought of it. thanks to Dave for finally figuring it out.
help on how to format text
Turn off "Getting Started"